The assembly shop is responsible for assemble parts into a completed unit. The production program indicates 30JPH. For interior decoration assembly line, 6800*4400mm skateboard line is adopted (better than Honda (Japan) skateboard line) with automatic assembly functions. Overhead friction conveyors are used for chassis assembly line and 3200mm-wide plate conveying chain for the Final Assembly Lines (the same specification as General Motor). Friction conveying lines are adopted for Assembly line of automobile doors. In accordance with the demands imposed by production scheduling, PBS base sorts...
發布時間:
2018
-
01
-
05
瀏覽次數:42
B1B2 compact coating technique, the most advanced technique at present, is used. Imported robots are employed in the plants with the automation rate of 90%. For colored paint, the plant uses eco-friendly water paint. 2K varnish with distinction in properties is adopted for the finishing coat. Combine these materials with RTO emission control system. It not only cut down energy consumption but also reduces emission. Robots with vision positioning system are employed at gluing and adhesive spraying stations for gluing work including underbody sealant, PVC AND SGC and so on. Water-based colored p...
發布時間:
2018
-
01
-
05
瀏覽次數:26
A mass production assembly line, imported robots from KUKA are used in the plant. Robotic automation in welding reaches 90%. Overhead EMS mechanized transport chains are adopted among the assembly lines. First-stage assemblies like body in white are conducted under flexible production. Multiple models are processed in batch and in turn. Key parts and equipments in main bodywork welding are imported. Quality control uses online robotic detection, lower car body and body in white automatic robotic detections.
發布時間:
2018
-
01
-
05
瀏覽次數:27
It mainly manufactures the bodywork stamping parts. In the plant, there is one four-order high speed XL automatic closed stamping line and two underground waste lines. For open blanking production line and high-speed XL stamping lines, imported devices are employed. And the stamping could reach 12 times/minute. It can produce steel and aluminum alloy stampings under its productivity. Open blanking production lines and stamping lines are fully robot operated. With automatic packaging and transshipping, the automation rate reaches more than 90%.
發布時間:
2018
-
01
-
05
瀏覽次數:20
Recently, the ‘smart.cheap.servant’ service management system step up once again. The all media customer interaction center in the Nanjing A.E Auto Department of public relations passed the 4PS contact center international standard certificate. This passage of 4PS certificate means the customer center’s management and service level has reached international, standardize and systematic achievement. The value of customer center has raised.
發布時間:
2018
-
01
-
05
瀏覽次數:18
The Provincial Department of industry and information technology reminds: the declaration of comprehensive incentive for new energy vehicle consumption in 2021 ends on January 15In 2021, Hainan made remarkable achievements in the promotion of new energy vehicles. According to preliminary statistics, in 2021, the province promoted more than 58000 new energy vehicles, accounting for nearly 7.2%, nearly 5 percentage points higher than the national average. This was learned by the reporter of Hainan Daily from the Provincial Department of industry and information technology on January 11.It is rep...
發布時間:
2022
-
01
-
12
瀏覽次數:2
On December 30, 2021, with the grid connection of CLP Jinchang photovoltaic power station and Jieyuan Shuangwan wind farm successively started, Jinchang power grid completed 7 new energy grid connected plants and stations in stock in 2021, with an installed capacity of 375000 kW, an increase of 15.4%. So far, the installed power generation capacity of Jinchang power grid has reached 4.6129 million KW. Among them, the installed capacity of new energy is 2.8112 million KW, accounting for 60.94%.Last year, State Grid Jinchang power supply company incorporated the new energy supporting power grid ...
發布時間:
2022
-
01
-
12
瀏覽次數:2
At 0:00 on December 27, PICC Property Insurance successfully signed the new energy vehicle insurance policy, becoming one of the first companies in the industry to use the new terms to underwrite the new energy vehicle insurance business.New energy automobile insurance is a product innovation in the property insurance industry. PICC P & C switched products online for the first time, which reflects that as a state-owned enterprise, it practices the people-centered development concept, actively contributes to the national 'carbon peak and carbon neutralization' strategy, and supports...
發布時間:
2021
-
12
-
28
瀏覽次數:2